 |
    |
|
The following specifications are designed to assist you in acquiring a FALLS® #20B Bumper to Frame Standard Hitch or its equal. Differences in manufacturing designs are acknowledged. The dimensions within the specifications are intended to indicate the size, type, and quality of unit desired. |
|
|
Mounting
Assembly: Mounting Assembly: |
The snow plow mounting system shall be Falls Heavy Duty Frame Hitch #20B or equal. Hitch system shall incorporate push arm receptor sockets for proper pin alignment. Mounting system shall adapt to frame rails of truck chassis and shall be adequately braced to the truck chassis frame by minimum 3/4" x 4" A-36 steel bars which shall be additionally reinforced to form a "T" section. Stabilizer arms shall be attached to the chassis frame by means of 1/2" thick steel "Z" brackets. Vertical risers and plow lifting yoke shall be low profile to allow clearance for tilting hood without tilting or disconnecting plow hitch. |
|
Lift |
Hydraulic plow lift cylinder shall be minimum 4" x 10" single acting type with 36 hr. salt spray chrome plated rod. Hydraulic cylinder shall be certified to a minimum of twice (2X) the working pressure of the hydraulic system. |
|
Paint: |
Shall be standard Falls color. |
|
Warranty: |
12 month limited warranty. |
