- FEATURES
- SPECIFICATIONS
- OPTIONS
FEATURES:
- Three (3) torsion spring trip sections.
- Standard cushion valve.
- Heavy-duty, simplified oscillating A-frame, 4" x 4" x 1/4" (101.6mm x 101.6mm x 6.35mm) square tubing.
- 1-1/2" (38mm) center pivot rod.
- 1/2" (12.7mm) thick end ribs.
- 2" (51mm) swivel bolt.
- 3/4" (19mm) chrome-vanadium torsion springs, two (2) per section.
- Optional coatings available for moldboard face.
- Standard screw adjustable mushroom shoe assemblies.
- Double, overlapping, 7 gauge (5mm) and 10 gauge (3mm), formed box sections provide full length reinforcement.
| MODEL | TER-10 | TER-11 | TER-12 | |
|---|---|---|---|---|
| Cutting Width @ 0 degrees | 10' 0" (3.05m) | 11' 0" (3.35m) | 12' 0" (3.66m) | Dimensions: Cutting width or space cleared by the snow plow shall be not less than ____ at 0 degrees and ____ at 35 degrees left or right. Overall width shall be not greater than ____. Overall height shall be not less than 42". Cutting edges shall be three (3) 5/8" x 6" in a combination of 3 ft and 4 ft. sections. Cutting edge shall be AASHO punched. Total weight shall not be less than ______________ pounds. |
| Cutting Width @ 35 degrees left or right | 8' 2" (2.5m) | 9' 0" (2.74m) | 9' 10" (3.05m) | |
| Overall Moldboard Height | 42" (1.07m) | 42" (1.07m) | 42" (1.07m) | |
| Moldboard Reinforcement | Two (2) double-formed box sections 7 (5mm) gauge, Grade A607-50 steel |
Moldboard: Moldboard shall be smooth rolled design. The roll radius of the moldboard shall be 22" for the first 22" and 10" for the last 12". Moldboard shall be constructed of not less than 10 ga. high strength carbon steel, A607 Grade 50 or equal. Mild steel is not acceptable. Moldboard shall be reinforced with two (2) full length formed box sections of not less than 10 gauge, A-607-50 steel. The outer ends of the plow shall be reinforced with 5/8" steel ribs extending from the lower support angle to the top of the moldboard. Top edge of the moldboard shall be double flanged or reinforced with a minimum 2" x 2" x 3/16" A-36 angle iron. The bottom moldboard support structure or frog shall be a minimum 5" x 3-1/2" x 1/2" thick A-36 MOD angle iron boxed the entire distance between bolt holes for reinforcement. Moldboard shall have built in snow deflectors. The built-in snow deflectors shall extend approximately 6" beyond a vertical line drawn from the leading edge of the cutting edge when the attack angle of the cutting edge is at 15 degrees (measured from vertical). |
||
| Moldboard Thickness | 10 gauge (3mm), Grade A607-50 steel | |||
| Screw Adjustable Shoes | Standard | Shoes: Power reversible snow plow shall be equipped with two (2) shoes, 1-1/2" thick x 11" diameter, Austempered Ductile Iron (A.D.I.) or equal. Shoes shall be adjustable without the use of tools. | ||
| Cutting Edges | Three (3), 5/8" x 6" (15.875mm x .152mm) AASHTO Punched |
|||
| Trip Mechanism | Torsion Spring, two (2) per section | Tripping Mechanism: The tripping mechanism shall be a sectional trip edge design allowing individual segments of the cutting edge to trip independently and return to the normal plowing position without manually resetting the cutting edge. Each tripping segment shall be equipped with two (2) 3/4" diameter torsion springs. The springs shall be chrome vanadium material. The lower moldboard support angle and tripping blade segments shall be minimum 4" x 3" x 1/2" A-36 MOD steel. The main pivot and support bar shall be a minimum 1-1/4" diameter cold rolled steel bar. |
||
| Reversing Cylinders | Two (2) 3" (.76mm) bore x 24" (.6m) stroke double acting |
Power Reverse Assembly: The hydraulic reversing cylinders shall be two (2) double acting, minimum 3" diameter, 20" stroke with 1-1/2" 36 hr. salt spray chrome plated shafts. Hydraulic cylinders shall be capable of high pressure operation and shall be burst strength tested to 8,000 psi. The hydraulic circuit shall include a hydraulic cushion valve to protect the circuit from sudden impact. | ||
| Approximate Weight, plow with push frame and hydraulics |
1700 lbs. (773 kg) | 1800 lbs. (818 kg) | 1900 lbs. (864 kg) | |
Hydraulic Lift Cylinders Shall be two (2) minimum double acting 3" diameter I.D. X 11-1/2"" stroke. The cylinder shafts shall be minimum 1-1/2" diameter and shall be coated with minimum 36 hour salt spray chrome. Hydraulic cylinders shall have an operating pressure of 2500 psi and shall be tested for a minimum 7,500 psi burst strength. Hydraulic cylinders shall have urethane Poly-pack seals and urethane wiper.
Mounting Assembly: The reversible angle push frame shall be of heavy duty construction. The push frame shall attach to the moldboard by means of a 1-1/2" pin. The main components of the push frame shall be manufactured of 4" x 4" x 1/4" wall square tubing, Grade A-500B or better. Power reversible snow plow shall incorporate a free floating oscillating feature to allow the plow to follow the changing road contours. This feature shall not be sacrificed if plow is equipped with any quick coupler. Push bars or quick coupler shall attach by means of not less than a 2" pivot bolt.
Specifications are subject to change without notice.
The policy and promise of Little Falls Machine Inc. is continuing product improvement. Design change and structural alterations may occur without prior notice. Such changes will not sacrifice quality or product integrity.
Also available: Carbide cutting edges, coatings for moldboard face, curb shoes, moldboard shoes level lift assembly.
Prices and specifications on request.