Power
Reversible
Plows
Spec Sheet

Check out our
Plow Operating
Tips

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player
  • FEATURES
  • SPECIFICATIONS
  • OPTIONS
FALLS POWER REVERSIBLE E-1 SERIES PLOWS Rigid and trip blade units are for use at all operating speeds.
Recommended for airports, highways, city streets and rural roads.
Power Reversible Plows Feature 1Power Reversible Plow Feature 2Power Reversible Plow Feature 3Power Reversible Plows Feature 4
Power Reversible Plows Feature 5Power Reversible Plows Feature 6power Reversible Plows Feature 7Power Reversible Plows Feature 8

FEATURES:

  • Heavy-duty double A-frame.
  • Quick coupler plow units attach to push plate with 2" diameter pivot bolt allowing desired snow plow oscillation for cleaner plowing.
  • Five rolled, heavy channel iron ribs provide maximum rollboard rigidity. Horizontal channel braces reinforce transverse stability.
  • Moldboard may be tilted forward or back depending on snow and road conditions.
  • Nitrided cylinders for increased corrosion resistance.
  • Bottom support structure is constructed of 4" x 4" x 3/4" A-36MOD angle iron reinforced between bolt holes.
  • Heavy-duty tubular push frame distributes plowing stresses across full length of moldboard.
  • Two heavy-duty single-acting reversing cylinders for quick control with hydraulic cushion valve for circuit protection.
  • Standard screw-adjustable mushroom shoes.
MODEL PR1043 PR1143 PR1243 PR1255 Specifications are intended to indicate size, type, and quality of unit desired.
Cutting Width @ 0 degrees
@ 35 degrees		10' 0" (3.05 m)
8' 2" (2.49 m)		 11' 0" (3.35 m)
9' 0" (2.74 m)		12' 0" (3.66 m)
9' 10" (3 m)		12' 0" (3.66 m)
9' 10" (3 m)		 The power reversible snow plow shall be the latest design and model. Materials used shall be top quality as specified to insure uniformity.

DIMENSIONS: Cutting width or space cleared by the snow plow shall be not less than _____ at 0 degrees and _____ at 35 degrees left or right. Overall width shall be not greater than _____ Overall height shall be not less than 43". Cutting edge shall be one (1) 5/8" x 6" x _____ft. Cutting edge shall be AASHO punched. Total weight shall not be less than ______ pounds.
Moldboard Height 43" (1.09 mm)43" (1.09 mm)43" (1.09 mm)55" (1.4 mm)

MOLDBOARD: Moldboard shall be smooth rolled design. The roll radius of the moldboard shall be 18". Moldboard shall be constructed of not less than 10 ga. high strength carbon steel, A607 Grade 50 or equal. Mild steel is not acceptable. Moldboard shall be reinforced with not less than five (5) rolled 4" channel iron ribs. The vertical braces shall be additionally reinforced with horizontal cross members of not less than 4" channel iron. Top edge of the moldboard shall be double flanged or reinforced with a minimum 2" x 2" x 3/16" A-36 angle iron. The bottom moldboard support structure or frog shall be a minimum 4" x 4" x 3/4" thick A-36 MOD angle iron boxed the entire distance between bolt holes for reinforcement. Moldboard shall have built in snow deflectors. The built-in snow deflectors shall extend approximately 12" beyond a vertical line drawn from the leading edge of the cutting edge when the attack angle of the cutting edge is at 35 degrees (measured from vertical).
Plow shall have variable moldboard pitch adjustment to allow the attack angle of the cutting edge to be changed from approximately 15 degrees to 35 degrees as measured back from a vertical line extending up from cutting edge.
OR
Plow moldboard and push frame shall be equipped with option of three different trip assemblies.

COMPRESSION SPRING: Plow shall be equipped with two (2) compression spring loaded pitch adjustment bars to allow the one way snow plow to "trip" over obstructions and return to the normal plowing position without having to manually reset the tripping device. Each spring shall be 9/16" diameter with a solid load rate of 1,644 lbs or a combined rate of 3,288 pounds.

TRIP EDGE:

SLOTTED TRIP:

 

Moldboard Ribs Five (5) Rolled Heavy Channel Iron
Moldboard Thickness 10 gauge (3mm), A607-50 Steel7 gauge (5mm)
A607-50

Snow Deflectors

Standard Built-in

 

Cutting Edge (AASHO punch)

 5/8" x 6" x 10'5/8" x 6" x 11'5/8" x 6" x 12' 5/8" x 6" x 12'

Spring Trip Assemblies

2

2

2

2

 
Approx. Weight,
Plow & Hyd-Reverse

1800 lbs. (818kg)

1900 lbs. (863kg)

2000 lbs. (909kg)

2200 lbs. (1,000kg)

 MOUNT ASSEMBLY: The reversible angle push frame shall be of heavy duty construction and shall be designed to distribute plowing stresses across the entire length of the lower moldboard angle. The push frame shall attach to the moldboard with no less than four (4) 1-1/4" diameter pins. The main components of the push frame shall be manufactured of 4" x 4" x 1/4" wall square tubing, Grade A-500B or better. The reversible A-frame shall be of tubular construction, minimum 4" x 2" x 3/16", A-500B or better. The reversible A-frame shall straddle the push frame, that is it shall be doubled such as manufactured by Little Falls Machine, Inc. and shall support the pivot pin at the top and the bottom for maximum strength. The pivot pin shall be a minimum 1-1/2" diameter. Power reversible snow plow shall incorporate a free floating oscillating feature to allow the plow to follow the changing road contours. This feature shall not be sacrificed if plow is equipped with any quick coupler.
Approx. Total Weight,
w/Hitch Assembly

2250 lbs. (1,022kg)

2350 lbs. (1,068kg)

2450 lbs. (1,114kg)

2650 lbs. (1,205kg)
REVERSE ASSEMBLY: The hydraulic reversing cylinders shall be two (2) single-acting, minimum 3" diameter, 20" stroke with 2" nitrated shafts. Hydraulic cylinders shall be capable of high pressure operation and shall be burst strength tested to 8,000 psi. The hydraulic circuit shall include a hydraulic cushion valve to protect the circuit from sudden impact. Minimum 3,000 psi.
SHOES: Power reversible snow plow shall be equipped with two (2) shoes, 1-1/2" thick x 11" diameter, Austempered Ductile Iron (A.D.I.) or equal. Shoes shall be adjustable without the use of tools.
PAINT: Available in all Falls standard colors.
ID and WARRANTY: Unit shall be identified with a metal plate. ID tag shall include model, serial number, and manufacturer. 12 month limited warranty.

REQUIRED VALVES
Standard snow wing requires two (2) double-acting control valves.

APPROVED MODELS include: Falls Model PR_____ Other makes/models must contact office a minimum of two (2) weeks prior to the bid opening date to allow time for approval.

Specifications are subject to change without notice.
The policy and promise of Little Falls Machine Inc. is continuing product improvement. Design change and structural alterations may occur without prior notice. Such changes will not sacrifice quality or product integrity.

Curb shoes at one or both ends.
Slotted trip assemblies.