FEATURES:

• The Falls X4 Pin and Loop Quick Coupler features a plow-mounted loop and truck hitch-mounted coupler that delivers coupling that's fast and reliable. The truck hitch coupler is a positive drop-in, lever actuated pin. This hitch system is interchangeable with other similar loop couplers.

The following specifications are designed to assist you in acquiring a Falls® #24B Bumper-to-Frame Hitch w/Pin and Loop or its equal. Differences in manufacturing designs are acknowledged. The dimensions within the specifications are intended to indicate the size, type, and quality of unit desired.

• Mounting Assembly: The snow plow mounting system shall be Bumper to Frame Hitch #24B or equal. Snow plow connection mechanism shall be the Pin and Loop QA hitch or equal. Mounting system shall adapt to frame rails of truck chassis and shall be adequately braced to the truck chassis frame by minimum 3/4" x 4" A-36 steel bars which shall be additionally reinforced to form a "T" section. Stabilizer arms shall be attached to the chassis frame by means of 1/2" thick steel "Z" brackets. Vertical risers and plow lifting yoke shall be low profile to allow clearance for tilting hood without tilting or disconnecting plow hitch. All mounting components shall be bolted to the truck chassis.
  
  
• Lift Assembly: Hydraulic plow lift cylinder shall be minimum 4" x 10" single acting type with 36 hr. salt spray chrome plated rod. Hydraulic cylinder shall be certified to a minimum of twice (2X) the working pressure of the hydraulic system.

Specifications are subject to change without notice.
The policy and promise of Little Falls Machine, Inc. is continuing product improvement. Design change and structural alterations may occur without prior notice. Such changes will not sacrifice quality or product integrity.