- FEATURES
- SPECIFICATIONS
- OPTIONS
FEATURES:
- 60" front lift height for higher benching.
- Improved front slide.
- Spring-loaded outer lift arm.
- 12 and 14 foot models available.
- Available for most makes and models.
- Reduced moldboard interference.
- Hydraulically-elevated rear slide arm available.
- Hydraulically-telescoping push arm available.
- Adds only 3,100 lbs. to grader (12' model).
- Free factory installation.
| MODEL | 2012 | 2014 |
|---|---|---|
| Overall Length | 12' 6" (3.843 m) | 14' 6" (4.45 m) |
| Moldboard Thickness | 7 gauge (2.72 mm) | |
| Moldboard Height, front | 36" (10.98 m) | |
| Moldboard Height, rear | 36" (10.98 m), optional: 32" (9.76 m) | |
| Cutting Edge (AASHO and carbide punched) | 1/2" x 6" x 12' | (2) 5/6" x 6" x 7' |
| (12.67 mm x 152 mm x 3.05 m) | (12.67 mm x 152 mm x 3.05 m) | |
| Average height under raised moldboard: front | 60" (1.525 m) | |
| Average height under raised moldboard: rear | 104" (2.643 m) | |
| Push Bar | One (1) spring-cushioned telescoping with safety shear | |
| Weight of Moldboard Only | 950 lbs. (432 kg) | 1,100 lbs. (500 kg) |
| Weight of Moldboard and Mountings | 3,100 lbs. (1,409 kg) | 3,300 lbs. (1,500 kg) |
REQUIRED VALVES
Standard snow wing (manual rear slide adjustment) requires two (2) double-acting control valves. Optional hydraulic rear slide adjustment requires an additional double-acting control valve. Required valves may be acquired through your motor grader manufacturer or through Little Falls Machine Inc. Please inquire.
Specifications are subject to change without notice.
The policy and promise of Little Falls Machine Inc. is continuing product improvement. Design change and structural alterations may occur without prior notice. Such changes will not sacrifice quality or product integrity.
Also available: Hydraulic Slide Adjustment (add 200 lbs). Hydraulic Push Bar Extension (add 150 lbs.). Ripper-mounted Push Bar. Prices and specifications on request.
